Firewall requirements description

Firewall requirements description - Printable Version

+- MinimServer Forum (https://forum.minimserver.com)
+-- Forum: MinimServer (/forumdisplay.php?fid=1)
+--- Forum: General (/forumdisplay.php?fid=2)
+--- Thread: Firewall requirements description (/showthread.php?tid=2761)

Firewall requirements description - gb24 - 22-11-2015 16:30

Simon and all, first, thank you for such a great music server and this support community.

I recently migrated from Ubuntu to Centos for my headless MinimServer which was working great for some time. The default firewall configuration for Centos was much more restrictive and I struggled a bit to get the right setup for MinimServer. Several posts on this forum helped me.

This worked for me:

Code:

$ sudo firewall-cmd --list-ports

1900/udp 9790/udp 9791/tcp 9790/tcp 9791/udp

$ sudo firewall-cmd --list-services

dhcpv6-client http samba ssh

Could I suggest a brief service/port/firewall requirements section in the MinimServer install instructions?

RE: Firewall requirements description - simoncn - 22-11-2015 22:52

(22-11-2015 16:30)gb24 Wrote: Simon and all, first, thank you for such a great music server and this support community.

I recently migrated from Ubuntu to Centos for my headless MinimServer which was working great for some time. The default firewall configuration for Centos was much more restrictive and I struggled a bit to get the right setup for MinimServer. Several posts on this forum helped me.

This worked for me:

Code:

$ sudo firewall-cmd --list-ports 1900/udp 9790/udp 9791/tcp 9790/tcp 9791/udp $ sudo firewall-cmd --list-services dhcpv6-client http samba ssh

Could I suggest a brief service/port/firewall requirements section in the MinimServer install instructions?

I understand the first list but not the second. MinimServer doesn't require DHCP, samba or SSH. MinimServer does use HTTP but I wouldn't have regarded this as a "service". It is just a protocol that any application can use over a TCP socket connection.

RE: Firewall requirements description - gb24 - 23-11-2015 03:29

I should have emphasized the http service on the second list - the others are not relevant as you say. Until I enabled http on the Centos firewall I could not connect to the MinimServer status page on port 9790.

Centos refers to http as a service when using firewall-cmd , for example:

Code:

firewall-cmd --permanent --zone=public --add-service=http

Perhaps add to the install instructions:

The following ports must be open on any firewall to access MinimServer:
- Port 1900/udp (UPNP)
- Port 9790/tcp
- Port 9791/tcp

Thank you.

Mark

RE: Firewall requirements description - simoncn - 01-12-2015 18:14

(23-11-2015 03:29)gb24 Wrote: Perhaps add to the install instructions:

The following ports must be open on any firewall to access MinimServer:
- Port 1900/udp (UPNP)
- Port 9790/tcp
- Port 9791/tcp

Thank you.

Mark

I have updated this section (new step 10) and this section (new step 7) to add this port information. Thanks for the suggestion.

RE: Firewall requirements description - gb24 - 03-12-2015 12:38

Simon, I'm sure this will help with troubleshooting connection issues.

Thanks again for a great music server.

Mark