![]() |
|
Add network location to contentDir - Printable Version +- MinimServer Forum (https://forum.minimserver.com) +-- Forum: MinimServer (/forumdisplay.php?fid=1) +--- Forum: General (/forumdisplay.php?fid=2) +--- Thread: Add network location to contentDir (/showthread.php?tid=3010) |
Add network location to contentDir - robgr - 28-03-2016 18:14 I am running MinimServer on a QNAP TS212-P and have two entries for MinimServer property contentDir which are paths on the NAS, all is fine I wnat to add a path on my networked PC which is \\STUDY\Users\robert\Music when viewed in Windows Explorer If I copy this verbatim into contentDir for MinimServer properties I get the error 'Not an absolute path; correct highlighted value and retry' Can I actually add a network path as described above? If so then what is the correct nomencalture for the path? I know I could run MinimServer on my PC but if the above can be achieved then it's just a single UPNP point for all my music RE: Add network location to contentDir - simoncn - 28-03-2016 20:00 (28-03-2016 18:14)robgr Wrote: I am running MinimServer on a QNAP TS212-P and have two entries for MinimServer property contentDir which are paths on the NAS, all is fine This is a Windows path. Your NAS is running Linux, so this path is not valid. If you want to do this, I think you would need to mount the Windows shared folder on the Synology as described on this page. Adding a remote shared folder to the MinimServer contentDir settings will cause very slow scanning performance for the remote files and is therefore not recommended. RE: Add network location to contentDir - robgr - 30-03-2016 08:39 Hi Simon, Thank you for your help, given your reply I can live without the PC music via my HiFi streamer |