+- MinimServer Forum (https://forum.minimserver.com)
+-- Forum: MinimServer (/forumdisplay.php?fid=1)
+--- Forum: Support (/forumdisplay.php?fid=4)
+--- Thread: Which Minimserver-Version for QNAP251? (/showthread.php?tid=3707)
Which Minimserver-Version for QNAP251? - Klaus57 - 18-12-2016 10:38
I have a new QNAP 251.
Yesterday I installed Minimserver for X64 on QNAP -it seemed to be ok, I could see the Minimserver with minimwatch and configure it. Today I started the NAS -and I got the message from the NAS-IOS that I am using an uncorrect Minimserver-Version. The CPU run to 100%. So I installed the X84 Version - now I have the situation, that Minimwatch does not "see" the minimserver on the QNAP-NAS.
IOS-Version on the NAS is QTS 4.3.2
The HS251 has an Intel Celeron CPU J1800;
At the same time I use the QNAP HS210 - Minim Server works with this NAS without any problems.
So first of all: which Minimserver for the QNAP 251 is really correct?
Thanks for your advice,
Klaus L.
RE: Which Minimserver-Version for QNAP251? - simoncn - 18-12-2016 13:03
Which version of QTS are you running on the 251?
RE: Which Minimserver-Version for QNAP251? - Klaus57 - 18-12-2016 13:34
(18-12-2016 13:03)simoncn Wrote: Which version of QTS are you running on the 251?
it is: 4.3.2 0026 Build 20161211
Klaus
RE: Which Minimserver-Version for QNAP251? - simoncn - 18-12-2016 17:27
(18-12-2016 13:34)Klaus57 Wrote: it is: 4.3.2 0026 Build 20161211
Klaus
For this, you need 0.8.4.2 x64 (not 0.8.4.1).
RE: Which Minimserver-Version for QNAP251? - Klaus57 - 18-12-2016 18:40
(18-12-2016 17:27)simoncn Wrote:(18-12-2016 13:34)Klaus57 Wrote: it is: 4.3.2 0026 Build 20161211
Klaus
For this, you need 0.8.4.2 x64 (not 0.8.4.1).
Thank you, Simon; at the moment everything seems to be allright.
Best reguards,
Klaus