![]() |
|
Status: Failed; Unable to migrate previous configuration - Printable Version +- MinimServer Forum (https://forum.minimserver.com) +-- Forum: MinimServer (/forumdisplay.php?fid=1) +--- Forum: Support (/forumdisplay.php?fid=4) +--- Thread: Status: Failed; Unable to migrate previous configuration (/showthread.php?tid=7857) |
Status: Failed; Unable to migrate previous configuration - nickc - 16-10-2026 21:40 This follows the replacement of the hard drives in a QNAP NAS, which had MinimServer installed though not active for a long time. Before the upgrade I backed up my apps and data, including MS, and after reinitialising the QNAP I restored everything. I suspect when the apps were restored MS automatically created fresh config files which caused problems when I then restored my data, which included the previous MinimServer folder. The full messages displayed are: "Media server status for MinimServer[LandroNAP]: Failed" And: "Unable to migrate previous configuration; saved as minimserver.config.copy" This latter line is repeated in the log file four times; the log contains no other clues. I tried deleting minimserver.config and minimserver.config.save, then relaunching MS, as that worked on a previous similar situation on a Raspberry Pi, but it hasn't helped this time. I see there's a minimserver.config.error file, which lists two different config versions: at line 1 ".configVersion = 2.2.120" and at line 8 "minimserver.configVersion = 2.2.139" Could that be the problem? Here's the full error file: Code: .configVersion = 2.2.120RE: Status: Failed; Unable to migrate previous configuration - nickc - 17-10-2026 09:58 I've found the solution in another post: stop MinimServer from within the QNAP App Centre, then start it again. Simple! Sorry to have taken up bandwidth. |