Post Reply 
Trouble with Minimwatch
29-11-2021, 20:30
Post: #1
Trouble with Minimwatch
Hi,

I have Minimserver running on a Synology NAS (2.0.18 update 201). It's working well. I am trying to get Minimwatch to work on a Windows 10 PC on the same network. Firewall is disabled. I can browse to 192.168.1.100:9790 in a browser on the PC running Minimwatch.

Tray icon is grey. What can I do?

Thanks in advance
M
Find all posts by this user
Quote this message in a reply
29-11-2021, 20:45
Post: #2
RE: Trouble with Minimwatch
From MinimWatch, select Options > Show log (watch) and look for the Active subnet value. What is this value and what is the IP address of your NAS?

If the first part of the active subnet doesn't match the first part of the IP address of your NAS, you need to set the ohnet.subnet property for MinimWatch (not MinimServer) as described in this section.
Find all posts by this user
Quote this message in a reply
03-12-2021, 04:00 (This post was last modified: 03-12-2021 04:01 by Mike48.)
Post: #3
RE: Trouble with Minimwatch
I'm having the same trouble. After using MinimServer and MinimWatch forever, MinimWatch on my Windows 10 PC suddenly is no longer detecting the MinimServer instance on my DS414.

The active subnet (192.168.0.0) seems correct.

The only change I can recall making recently was to check "Enable Local Master Browser" in the DSM section controlling SMB filesharing.

MinimServer is working fine with BubbleUPnP, but MinimWatch is not detecting it any more. Help welcome.

Mike
Portland, Oregon, USA
Find all posts by this user
Quote this message in a reply
03-12-2021, 08:47
Post: #4
RE: Trouble with Minimwatch
Try to check the pc network type, should be Private. If Public Windows will deny any connection
Find all posts by this user
Quote this message in a reply
03-12-2021, 09:28
Post: #5
RE: Trouble with Minimwatch
If Java has been updated on your PC, your need to update your firewall rules.
Find all posts by this user
Quote this message in a reply
03-12-2021, 17:55 (This post was last modified: 03-12-2021 17:55 by Mike48.)
Post: #6
RE: Trouble with Minimwatch
@stefano_mbp: Yes, it is set to Private and has been so for 10 years.

@simoncn: Usually after a Java update, there is a popup when I first run MinimWatch, asking for an exception. None here. ALSO, I disabled the firewall on the private network, exited MinimWatch, and restarted. It still didn't detect the server. I'm baffled.

Thanks, both, for replies!

Mike
Portland, Oregon, USA
Find all posts by this user
Quote this message in a reply
04-12-2021, 21:39
Post: #7
RE: Trouble with Minimwatch
In cases like this, it sometimes helps to power all your network equipment off and on.
Find all posts by this user
Quote this message in a reply
05-12-2021, 02:14 (This post was last modified: 05-12-2021 02:15 by Mike48.)
Post: #8
RE: Trouble with Minimwatch
Hi Simon --

You are right (as always)! I had to turn everything off to install a new router -- then again to un-install it -- and voila! MinimWatch is green again.

Mike
Portland, Oregon, USA
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)