|
Minimsever is not seen by my Stereo after a "soft" power cycle
|
|
13-11-2026, 22:54
Post: #1
|
|||
|
|||
|
Minimsever is not seen by my Stereo after a "soft" power cycle
Hello,
I have a Fusion MS-RA770 marine stereo (my wife and I live on a sailboat) and it is ethernet connected to my LAN on which there is a Synology NAS which is running MinimServer. My Fusion radio can be powered on/off via its touchscreen, and it is normally how we power the device on and off. The other option, since we are on a boat, is to flip the DC breaker which provides power to the Stereo. The discovery and communication behavior depends on the power-cycling type I use. If I power-up from fully off (no DC power), then the Fusion discovers the MinimServer and they communicate; I can browse and play music no problem. If I power off the radio with the touchscreen (which is likely really a low power sleep) and then power the radio back on hours later, the MinimServer is still listed as a source, I can click it, but as soon as I try to browse the available media, nothing is found and then going back to the source menu shows no DLNA source anymore. Note, it is possible that it still shows up simply because if was the last i input used. It would be easy to pass this off as some anomaly of the stereo, however, when I used to use Synology's built-in Media Server, this never happened. As an aside, I switched to MinimServer because the MediaServer would eventually becomes very slow to browse through our music collection making it painful to use. I am trying to do some additional testing to see how long the stereo has to be in "soft power off" mode for this to occur and maybe I can corelate this time with something. I am also using Code: sudo tcpdump -i any -nn -s 0 -A 'udp port 1900 or (host 10.0.0.4 and tcp)'I'd be happy to hear of anyone else's thoughts or pointers and will report back with my findings on the timing. Thanks, Mike |
|||
|
Yesterday, 10:59
(This post was last modified: Yesterday 11:00 by simbun.)
Post: #2
|
|||
|
|||
RE: Minimsever is not seen by my Stereo after a "soft" power cycle
(13-11-2026 22:54)Bucket1616 Wrote: If I power off the radio with the touchscreen (which is likely really a low power sleep) and then power the radio back on hours later, the MinimServer is still listed as a source Is there an associated SSDP M-SEARCH request at this point? (13-11-2026 22:54)Bucket1616 Wrote: I can click it, but as soon as I try to browse the available media, nothing is found and then going back to the source menu shows no DLNA source anymore. Note, it is possible that it still shows up simply because if was the last i input used. When you select the MinimServer library the radio should send a Browse request to MinimServer to retrieve the root index (e.g. n albums, n items). To check if MinimServer receives such a request set the logging level to debug (MinimWatch > Show Log > Logging level: Debug) just before powering the radio back on. Make sure to set it back to Info afterwards. |
|||
|
Yesterday, 14:24
Post: #3
|
|||
|
|||
|
RE: Minimsever is not seen by my Stereo after a "soft" power cycle
The UPnP protocol requires the server and control point to renew subscriptions every 30 minutes at the latest (15 minutes recommended). It sounds like this didn't happen because of the low power state, so the subscription was ended.
|
|||
|
Yesterday, 22:34
(This post was last modified: Yesterday 22:39 by Bucket1616.)
Post: #4
|
|||
|
|||
RE: Minimsever is not seen by my Stereo after a "soft" power cycle
(Yesterday 14:24)simoncn Wrote: The UPnP protocol requires the server and control point to renew subscriptions every 30 minutes at the latest (15 minutes recommended). It sounds like this didn't happen because of the low power state, so the subscription was ended. This sounds like the most likely culprit. I'm guessing that Synology's Media Server must just handle this different. I'm assuming there are no configuration options for minimserver that would help me work around this? I do know that the stereo sends a "goodbye" message when I press the soft-off/sleep. I'll have to see what it sends when it powers up after a long sleep. Mike |
|||
|
Yesterday, 22:38
Post: #5
|
|||
|
|||
|
RE: Minimsever is not seen by my Stereo after a "soft" power cycle
I will have to try both of these. It seems like the subscription expires after more than 30 minutes, so I will have to remember to set up the capture before I power on when I think the issue will occur.
|
|||
|
Yesterday, 23:30
Post: #6
|
|||
|
|||
|
RE: Minimsever is not seen by my Stereo after a "soft" power cycle
Some media servers (probably including Synology) send very frequent Alive messages. This is isn't recommended because of the extra network traffic that it causes.
MinimServer uses the ohNet UPnP stack which doesn't have any option to send Alive messages more frequently than is required by the UPnP specification. It is possible that MinimServer would be discovered automatically within 15 to 30 minutes of your radio coming back on. This doesn't help you much but would confirm the cause of the problem. |
|||
|
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)

Search
Member List
Calendar
Help



