Minimwatch doesn't connect to minimserver on qnap

[simoncn]

My test results are as follows. I am using a main subnet 192.168.0.0 on adapter 1 and an additional test subnet 192.168.1.0 on adapter 2.

Scenario A:
1) Enable both adapters. With ohnet.subnet unset, start MinimServer from App Center.
2) MinimServer starts and is visible and functional on subnet 192.168.0.0. It is probably also visible on 192.168.1.0 but I can't easily confirm this with my test setup.
3) Set ohnet.subnet to 192.168.0.0.
4) MinimServer remains visible and functional on subnet 192.168.0.0. It is probably not visible on 192.168.1.0 but I can't easily confirm this with my test setup.

Scenario B:
1) Enable both adapters. With ohnet.subnet set to 192.168.0.0, start MinimServer from App Center.
2) MinimServer starts and is visible and functional on subnet 192.168.0.0. It is probably not visible on 192.168.1.0 but I can't easily confirm this with my test setup.

Scenario C:
1) Enable both adapters. With ohnet.subnet set to 192.168.0.0, start MinimServer from App Center.
2) MinimServer starts and is visible and functional on subnet 192.168.0.0. It is probably not visible on 192.168.1.0 but I can't easily confirm this with my test setup.
3) Remove the ohnet.subnet setting.
4) MinimServer disappears from subnet 192.168.0.0.

Scenario C is not as expected and appears to be a problem with either MinimServer or ohNet. You should avoid doing this at present and should instead use either scenario A or B to run MinimServer on one adapter/subnet while leaving the second adapter/subnet free for other purposes.